Wardrobe in the hallway: photos of various design variations
Wardrobe in the hallway: photos of various design variations
The wardrobe in the hallway – the photos clearly demonstrate the varieties of the product – is one of the most necessary elements of furniture in the room. Its design and dimensions are selected taking into account the characteristics of the corridor. The internal filling should be well thought out so that it is possible to rationally use every centimeter of space. Thanks to the variety of facade design, the product can be harmoniously integrated into any interior of the room.
The main advantage of wardrobes for the hallway is a variety of designs, variations of installation and design
What can be a closet in the hallway: photo options
When designing the corridor space, a special approach is required. Usually the room is not large in size and has structural features that manifest themselves in the presence of niches, exterior corners and interior doors, which complicates the process of furnishing the corridor. In this limited space, it is necessary to be able to balance functionality and aesthetics.
A wardrobe is a non-mobile structure mounted in one place
In the hallway, you can install a wardrobe, a product with hinged doors and a combined design. The first option is the most popular and in-demand solution. This design will fit even in a narrow and cramped space thanks to ergonomic sliding doors. Due to the diversity of the design of the facade of the cabinets for the hallway – the photos clearly demonstrate this – the corridor will acquire a well-groomed, stylish and presentable appearance. Outerwear, seasonal shoes, hats and other accessories will be hidden behind the sliding structure from prying eyes.
The reliability and durability of the doors depends on the material of the frame, where the movement of the canvases is carried out. Aluminum products are considered to be of higher quality. They ensure the silent running of the canvases, do not deform and serve for a long time. Steel guides have a lower cost. Their service life does not exceed 5-8 years.
The wardrobe is perfect for hallways of different sizes, it is easily integrated into any niche
Important! The compartment system takes up to 10 cm of internal space, so the shelves will have a smaller width than the structure itself.
Traditional configuration of cabinets for the hallway
Cabinets with hinged doors, resembling pencil cases, need a large space needed to open the structure. The internal content is no different from the previous version. This model is most often installed in a spacious hallway, photos of cabinets display possible design options. The closed product is usually made of natural wood. The facade is decorated with decorative carvings and forged fittings, which creates a respectable appearance of the product, emphasizing the delicate taste of the owner of the apartment.
For cabinets with hinged doors, you need more space to open them easily
Very often you can find an open-type cabinet built into a niche in the hallway, which is devoid of opening doors. This option looks minimalistic, but is the most convenient to use, as it allows you to quickly remove clothes from the hook or take the necessary accessory from a shelf or drawer. However, since all the contents of the structure are in plain sight, the things in the closet should be carefully equipped so that the situation in the room does not resemble chaos.
Combined models are a combination of closed and open cabinets. A small pencil case can be located here. The open part is represented by shelves and hooks, and in its lower space you can equip a comfortable small ottoman. It is used not only for sitting – in its cavity you can equip a space for storing various things.
The most convenient for the hallway are considered to be combined models, which are a combination of closed and open cabinets
Which one is better to choose for the hallway wardrobe
The best option for the hallway is a wardrobe with a sliding door system. Due to the fact that the product can be shallow (only 45 cm), a lot of space is not required to install the structure. This is enough to arrange outerwear, shoes and everyday accessories. Sliding doors allow you to save space without needing free space to open them.
There are two design options: a free-standing product and a built-in cabinet. The first type is a full-fledged model consisting of a frame, internal filling elements and sliding doors. The structure can move from place to place. Such a cabinet is usually used for rooms with a large area, where you do not have to save space. The disadvantages of the product are its high cost, which is associated with high material costs, and a relatively small usable area (due to the presence of a frame). In addition, dust accumulates in the upper part of the structure, due to the formation of a gap between the product and the ceiling.
There are practically no disadvantages of wardrobes, except for the inconvenience of sliding doors, which open some shelves, close others
Built-in models can often be found in modern hallways. This design is made to order in the hallway. The built-in cabinet can be mounted in any cramped space. Such a product does not have its own walls, ceiling and floor, as they are replaced by elements of the room to which the filling and cabinet doors are attached. This allows you to significantly save on materials, so such a design will be inexpensive. Photos of built-in wardrobes and prices for products can be seen in catalogs from well-known manufacturers.
Such a cabinet is as roomy as possible and allows you to fully utilize the space allocated for it. The design of the product can be created taking into account the specifics of the corridor layout. It occupies the entire area from floor to ceiling, which eliminates the accumulation of dust on the horizontal surface. The main drawback of the built–in furniture element is its stationarity.
Cabinet models of the wardrobe leave a gap to the ceiling, and the built-in ones completely cover the entire wall
Configurations of built-in wardrobes in the hallway
The design of the built-in wardrobe completely repeats the layout of the place of its installation. The product can be mounted in a niche, in a corner or occupy a space between two walls. For small-sized corridors, the most rational option is an angular design. In this case, it is possible to use the dead small area of the room as efficiently as possible by organizing a compact storage system there. This design will allow you to free up space along the walls, as a result of which the room will seem more spacious and comfortable.
The corner wardrobe built into the hallway consists of elements of internal filling and sliding doors. A kind of angular model is a trapezoid-shaped structure, which is additionally equipped with side faces. Such a cabinet is more spacious than a simple triangular analog. The outer sidewalls of the structure can be equipped with open shelves to accommodate various small things.
Types of wardrobe designs in the hallway
The rectangular module is also very popular, which is due to the low cost and the original design of the facade, which can be made in any stylistic direction. The design fills the area of the room along one of the walls. It can have different depths, which depends on the availability of free space.
The most difficult to perform and expensive are the radius wardrobes, in which the movement of the doors is carried out along the radius of the circle. The facade of such structures is made of expensive materials using a special technology, which significantly increases the price of a built-in wardrobe in the hallway. However, this is compensated by a spectacular, stylish, original and unique appearance. This model is able to fit into any layout, which is due to the ergonomic opening of the doors. The disadvantage of the cabinet is the inability to use mirrors and chipboard in the manufacture of doors.
A common configuration of a built-in wardrobe is a model in which the walls of the room itself take on the role of walls
Useful advice! The radius compartment does not have straight and sharp corners, so it is considered less traumatic and suitable for homes with children.
How to choose the right size of the wardrobe for the hallway
As mentioned earlier, the closet in the hallway can be located in a corner, in a niche or along one of the walls. The size of the structure depends on it. In the hallway, built-in corner cabinets and rectangular products can have different dimensions. If the cabinet is mounted in a niche, then in this case there are certain restrictions that depend on its depth, height and width. The last parameter determines the number of doors. Two-door cabinets are suitable for niches with a width of 1.5–2 m, three–door – 2-3 m, four-door – 2.5-4 m. Too narrow doors will fall out of the lower slots, and wide ones will deform over time.
Important! The width of the compartment doors should not exceed 0.5-1 m.
Its size will depend on exactly where the wardrobe will stand in the hallway
It is necessary that the niche is completely closed by doors in height, but the frame cannot exceed 2.7-2.8 m. A taller structure will lack the necessary stability and rigidity. If the room has high ceilings, which are also characteristic of the niche, the doors should be made of separate segments, and different materials can be used. Variants of the spectacular and unique design of the facade are shown in the photo of the built-in cabinets in the hallway.
Related article:
Corner wardrobe in the bedroom: a spacious and multifunctional element of the room
Organization of internal content. Product dimensions. Types and design of doors. Material of manufacture. Manufacturers.
For a full-fledged wardrobe, the niche should have a depth of 0.6-0.7 m. If this value is less, filling for such a structure is provided for narrow corridors. If the cabinet has a depth of less than 40 cm, the shelves of the structure will be ineffective, since their width will be about 30 cm. If the niche is deeper than 1 m, in this case it becomes possible to create a full-fledged dressing room. However, here it is necessary to properly organize the internal filling so that the cabinet is comfortable during operation.
Recommendations for filling wardrobes in the hallway
Hallway cabinets are more specialized. The structures do not differ in large dimensions, since they are designed for storing outerwear and seasonal shoes. Special holders for ties and trousers are not used here, and drawers for underwear, socks and belts are not used.
The internal filling of the wardrobe in the hallway can be fixed or combined. The first option clearly defines the location of shelves, drawers and hangers. Combined models are equipped with removable shelves, places for fasteners and other elements that allow you to subsequently change the location of the internal filling. Despite the fact that the latter option is much more convenient, from the point of view of reliability, such a solution loses.
The functionality of the wardrobe strongly depends on the thoughtfulness of its contents
Outerwear is stored exclusively on hangers, so most of the interior space is allocated for a niche with a barbell. If the cabinet is narrow double-leaf, then hanging clothes occupy both compartments. Shelves can be located in the upper and lower part of the structure. In the case of an overall three-door cabinet, one compartment is used for stationary or pull-out shelves, which is clearly visible in the photo of the wardrobes in the corridor.
Useful advice! In a small–sized closet, the interior space can be zoned in this way: in one compartment there is a long outerwear, in the other – a shorter one, which allows you to complete the niche with additional shelves.
With a design depth of 50-60 cm, an ordinary rod is mounted parallel to the doors. If the cabinet is narrow, 30-45 cm deep, an end crossbar is used. The capacity of such a design is much smaller, but you can fix it with a pull-out hanger. It is not recommended to install a pantograph for a closet in the hallway. The constant descent and ascent of the structure is difficult and tedious.
The upper shelf is used to place hats, scarves and gloves. For the location of shoes, it is recommended to use inclined metal grids, which are located at the bottom of the cabinet. If space allows, you can equip several drawers for storing shoe cosmetics and various accessories. If there is a side wall in the design, hooks for bags and hats can be placed on it. Various options for filling the closet in the hallway can be seen in numerous photos on the Internet.
When choosing a ready-made wardrobe or ordering an individual one, you need to pay attention to the capacity of shelves, drawers, the number and purpose of clothes rods
Important! The fittings for the closet in the corridor should be as strong as possible, since it will take a higher load than the furniture in other rooms.
The material used for the manufacture of built-in cabinets in the hallway
The fundamental factor that affects the reliability, durability and appearance of furniture is the material of manufacture. Built-in wardrobe to order in the hallway can be made of chipboard, MDF, natural wood and plywood. The first option is an affordable alternative to natural material. With high-quality cladding, the product is able to completely imitate wood. There are several types of chipboard that differ in the amount of formaldehyde resins in the composition of the substance. For residential premises, type E1 should be used, which is the most environmentally friendly material with a low content of harmful substances.
To ensure wear resistance and moisture resistance, the material is covered with a special protective film, which prolongs the service life of the product. However, with the slightest violations of such finishing, the chipboard begins to collapse. The material is characterized by a wide range of species, but its appearance is devoid of elegance and originality.
An equally popular option for making a built-in wardrobe to order is MDF. The material is characterized by density, moisture resistance, strength and durability. A wide range of products, which is achieved by covering the surface of plywood with veneer, vinyl or melamine paper, allows you to choose an option for any interior.
A wardrobe made of MDF will cost more than a similar wardrobe made of chipboard, since this material is very durable and resistant to moisture
Natural wood has significant advantages over chipboard and MDF (regarding the quality and environmental friendliness of the material). The wooden structure has a solid and presentable appearance, which is clearly seen in the photo of the design of the cabinets in the hallway. The material is characterized by strength, wear resistance, practicality and durability. However, such a built-in wardrobe in the corridor will be distinguished by a high cost.
Useful advice! It is not recommended to install a wooden structure in rooms with high humidity, since the product may deform.
Plywood is represented by a multilayer wood material consisting of veneer sheets glued together. The surface can be laminated, varnished or painted. This material can be combined with other options, thanks to which it will be possible to get an attractive design of a wardrobe in the hallway. The photos clearly display various design ideas.
Variants of the facade of built-in wardrobes in the hallway: photo examples
Selecting the material for the facade, you should be guided by the door opening system. Swing elements are better made of chipboard, MDF or plastic. For the sliding system, you can use any material.
Natural wood is rarely used in the manufacture of wardrobes due to the high cost of construction
A facade made of chipboard is the cheapest option, acceptable for families with any income. The material is characterized by durability, environmental friendliness, resistance to dirt and moisture. The surface can be laminated or finished with natural oak, beech, pine or ash veneer, as shown in the photo of the wardrobes for the hallway. This option is suitable for corridors decorated in a classic style.
The MDF facade is also characterized by high performance indicators. The smooth and even surface can be painted in any color, which allows you to fit the product into any interior of the hallway, photos of MDF wardrobes are a clear confirmation of this.
Important! The ends of the MDF and chipboard surfaces are covered with a reliable PVC film, which protects the product from moisture and damage, giving the material a more neat appearance.
Rattan and bamboo facades look interesting and natural. Such furniture gives the room a feeling of warmth, naturalness and naturalness. It is relevant for corridors created in an ethnic style. The design of the wardrobe in the hallway, made of artificial leather, will look luxurious and stylish. The model will become a real decoration of the corridor, decorated in a modern interpretation or in the Baroque style.
MDF canvas can be painted in various colors and covered with high gloss enamels
Wardrobe in the hallway: photos of models with mirror, glass and plastic facades
The most popular among other options is a mirrored facade, variations of the use of which are shown in the photo of wardrobes in a small hallway. It always looks stylish and original, which is ideal for rooms decorated in the style of minimalism, loft and hi-tech. The mirror is harmoniously combined with different materials. The surface can be sandblasted or photo-printed. Using modern technologies, it is possible to create complex and voluminous drawings and patterns on the mirror – this is clearly shown in the design photo of the built-in wardrobes in the hallway.
Often in the corridor you can find a structure with a glass facade. In this case, a matte material is often used, which allows you to achieve the effect of translucency, protecting the inner filling from prying eyes, and at the same time visually increase the dimensions of the room. So you can arrange a built-in wardrobe in a small hallway. In addition, transparent glass is used, on the reverse side of which a decorative PVC film is attached with special additives that increase the strength and durability of the structure. Such a glass facade can be monophonic, multicolored or with various abstract and mosaic drawings.
Prints on all doors are very popular, which are combined into a single composition in a closed position. During their movement, the image acquires volume. This effect is clearly demonstrated in the photo of the built-in wardrobes in the hallway.
Important! If the facade surface is damaged, the fragments will not fly apart, because they will be held by the film.
For the manufacture of the facade of radius models, acrylic plastic is very often used, which can be matte or glossy. The material is characterized by a relatively low weight, which reduces the load on the profile, while increasing the period of operation of furniture. A pattern is applied to acrylic or the surface is decorated with filling of flowers, leaves or coffee beans – this is clearly demonstrated by photos of corner built-in wardrobes in the hallway.
Mirrored doors installed in the wardrobe will expand the space, so that the hallway will become noticeably larger
Assembling a built-in wardrobe in the hallway with your own hands
The assembly of a built-in modern wardrobe in the hallway begins with the installation of the main walls. The frame elements are attached to the ceiling, walls and floor using dowels. Corners are used to connect the parts together. In order for the design to have a beautiful appearance, plastic elements should be used that cover the caps of the screws. For the reliability of the structure, you can use steel corners.
A modern option for attaching furniture elements to each other is the use of eurovints. However, they require pre-drilling holes with a confirmant. To give the structure additional rigidity, furniture sheets are used. Eurovints are twisted by means of a hexagon. Plugs are inserted into their hats to match the color of the cabinet.
After mounting the base, partitions and shelves are installed, which can be attached with corners, confirmants, eccentrics or shelf holders. The simplest, cheapest and most primitive is the first option. For high loads, Eurovints should be used. A reliable, but time-consuming attachment is an eccentric, the cap of which will be visible from the bottom of the shelf. The optimal invisible option is shelf holders.
Useful advice! Confirmants must be installed exclusively in invisible places so that the hats do not spoil the appearance of the structure.
The self-assembly of the wardrobe will not only bring pleasure, but also allow you to save on the services of a specialist
The final and most important stage is the installation of sliding doors. Installation begins with the fastening of transverse profiles, which are stuffed with a rubber hammer. Further, horizontal guides are mounted by means of screws. The upper element is used to fix the doors relative to their depth, the lower one provides opening and closing.
Choosing a wardrobe in the hallway is a very responsible event. The design should become not only a convenient storage system, but also a stylish element of the corridor.
