Thermostat for infrared heater: types, installation
Thermostat for infrared heater: installation and use
Modern developments aimed at reducing electricity costs have become especially popular in recent years. At the same time, such devices also allow you to increase the efficiency of heating devices by controlling their operation. A common example of this is a thermostat for an infrared heater. Let’s consider the features of its selection, connection and operation.
The thermostat regulates the operation of the heaters, thereby significantly reducing electricity costs
Varieties and characteristics of thermoregulators
A thermostat is a device that performs periodic measurements of the indoor air temperature and, depending on the results obtained, corrects the operation of the heating device. That is, if the air temperature has reached the set mark, the power supply is limited and the heater stops working. As soon as the air cools down, the device enters the active phase again, thus constantly maintaining the desired level of heat in the room.
The design and operating principle of temperature control devices may differ significantly from each other. There are two main types of thermostats:
Mechanical type of thermostat for infrared heater
The first version of thermoregulators is a small plastic box, the outer part of which is equipped with a switch. As a rule, it is round, which allows you to smoothly change its position. The value of the division can be different, for example, in some models it is 1°, and in others the transition occurs immediately from 2° to 5 °, etc. In addition, there is a power button on the case and a light indicator showing whether the device is currently active.
There are also more modern mechanical models of thermoregulators that are equipped with a display. However, there is not much data displayed there, and temperature control occurs with just two control buttons.
Useful advice! It is convenient to use a mechanical thermostat only if one of the tenants is present in the house for a considerable time. This is an important point, since it is better to turn off the device in the absence of people. The remote control function is not provided.
An electronic type of thermostat that controls the operation of an IR heater
Electronic thermoregulators have much greater control capabilities. The design and construction of these devices are constantly being upgraded – even liquid crystal screens are used for the manufacture of modern models.
Depending on the selected model, the adjustment and control can be carried out either by means of buttons or by touch. In some devices, special flip covers are used to protect the screen, as well as to create a more attractive appearance.
Such devices can be used without problems even in those houses where the owners are often absent or live seasonally. The device is easy to program and is easily controlled remotely using mobile devices. The only difficulty in acquiring such a thermostat is a fairly high cost.
How to connect a thermostat to an infrared heater
Whichever of the above options you choose, correct installation is required for its accurate and correct operation. First of all, this is due to the choice of a suitable place, making which you should take into account the following factors:
- the device may be harmed by high humidity;
The process of installing the thermostat with your own hands
- there should be no sources of heat or sunlight nearby.
If these factors are not taken into account, temperature measurements will be made inaccurately, which will lead to incorrect operation of the heating device and its inability to maintain the necessary temperature in the house.
A separate issue is the connection of the device itself to the network and the infrared heater. In order to connect all these elements together, it is necessary to use an automatic relay. It will serve as a power source for the heater. Let’s look at some of the most common connection options.
Wiring diagrams of an infrared heater via a thermostat
The fastest and most understandable scheme for connecting a thermostat to an infrared heater is to use 1 thermostat for 1 heater. In this case, the connection scheme is as simple as possible: the machine has 2 pairs of wires, one of which goes to the thermostat. One wire is zero, the other is phase. And you need to connect them accordingly. With the help of the second pair of wires, the connection is made with the heating device itself.
Options for connecting infrared heaters via a thermostat
The second, slightly more complex, method of connecting an infrared heater through a thermostat involves the use of a parallel connection. Thus, two heating devices can be connected to one thermostat at once. One pair of wires from the machine is connected to the thermostat, from which, in turn, wiring is done to two different heaters.
The most difficult, but at the same time the most practical option is to use one thermostat for several household heaters. For this purpose, it is necessary to use a magnetic starter, and the connection scheme should be developed individually. Of course, you can try to find a ready-made one, but this method will not be able to guarantee the smooth operation of the system for sure.
Useful advice! It is also worth paying special attention to calculations and the development of an individual plan because your safety depends on it. Malfunctions in the heating system can lead to fire-hazardous situations.
To connect several heaters, you need to use a magnetic starter
There are even manufacturers that produce original magnetic starters for their devices, as well as sets of wires necessary for their connection. Thanks to this, it is much easier to connect, and the quality of such goods is considered higher. But in any case, if you have not dealt with electricity before, it is better to entrust the development of the circuit and the connection of the system to professionals.
Infrared heater with thermostat: prices and characteristics of three popular models
Wall and ceiling models of infrared heaters are quite popular, their main advantage is their compact size. In addition, buyers are attracted by the design and the opportunity to choose a model for the interior of the room. Below you can see the characteristics and prices of several popular infrared heaters with a thermostat.
Nikaten 200 is one of the most modern infrared heating stoves. The control of the dynamics of changes in the temperature regime is regulated by a built-in thermostat. In addition, there is a security system that automatically turns off the device in case of a dangerous situation or a fire threat.
The change in the temperature regime of the Nikaten 200 heater is regulated by a thermostat built into the design
The main characteristics of the heater Nikaten 200:
- ceramic panel;
- size – 30×60 cm;
- cools down for 90 minutes, continuing to generate heat;
- silent operation;
- the most simple installation.
The distinctive qualities of this panel can be called a huge selection of color solutions, as well as quite affordable cost – about 3,500 rubles.
The Zilon IR-0.8 S heater was designed as a wall-ceiling heater. This model can be fixed on any suitable surface. The set includes a thermostat that regulates the correspondence of the set and real temperature parameters. To protect the device, an automatic shutdown is provided in case of overheating.
Complete with Zilon IR-0.8 S panels, the manufacturer provides a thermostat that helps maintain a comfortable temperature in the room
Main Features of Zilon IR-0.8 S:
- power — 0.8 kW;
- size – 119x13x4 cm;
- weight – 3.2 kg;
- does not affect the carbon dioxide content in the air;
- consumes a minimum amount of electricity.
Nevertheless, users point out some disadvantages of using this model. So, during warming up or cooling down, the device emits a characteristic crackling, which not everyone likes. And being located on the ceiling, it can not always warm up the floor well enough. And yet, considering that the cost of such a heater is only 2,400 rubles, the device can be called one of the most worthy.
Layout of Zilon IR heaters
Noirot Royat 2 1200 is a universal wall heater equipped with three modes at once, which makes its use convenient throughout the year and in any room. The direction of the heat flow can also be adjusted by turning the surface at different angles (up to 30 °). In order for the regulation to be carried out as conveniently as possible, the developers took care of the possibility of attaching the control unit both on the right side and on the left.
Main Features of Noirot Royat 2 1200:
- quartz heating element;
- three power modes – 0,3/0,6/1,2 kW;
- size – 45x12x11 cm;
- there is a thermostat and a fuse against overheating;
- it works silently.
Perhaps the only drawback of this device is a fairly high cost – about 9700 rubles. Otherwise, the device is considered reliable and is often used to heat rooms such as the bathroom.
The Noirot Royat 2 1200 infrared heater is equipped with a thermostat, as well as an overheat protection system
Outdoor infrared heaters with thermostat
Another popular type of device is outdoor infrared heaters with a thermostat. The price of such devices does not differ much from other options, however, due to their mobility, they are often more convenient. If you want to buy an infrared floor heater with a thermostat, you can easily choose a model that is suitable specifically for your conditions among an extensive number of offers.
As an example, let’s consider such a popular line as infrared heaters in Valu, it is impossible to connect a thermostat to which independently, but it is very easy to pick up an already equipped model.
The connection of the infrared heater to the Valu via the thermostat takes place according to standard schemes. The control device is built into the heater housing.
One of the most popular models of these heaters is BALLU BIH–L Bali series. Included with this device is a modern steel telescopic tripod BIH-LS-210. It provides a strong fixation of the device and allows you to use it on summer playgrounds, verandas, in the garden.
The scheme of selection of electric infrared heaters BALLU
Main characteristics of the BALLU BIH-L heater:
- power 2-3 kW;
- tripod mounting height up to 4.5 m;
- for uniform heating it is equipped with a special reflector with fins;
- the set includes brackets for mounting to the surface;
- the case is made of steel;
- the connection of the thermostat to the infrared heater in the Hall is made by the manufacturer;
- there is a function to control the heating of the device.
This model is considered the most versatile, as it can be installed almost anywhere: in the house, on the street or on the veranda. Providing uniform heating, it creates a comfortable temperature for everyone who is in range, while not spending extra energy on heating the air.
Electronic thermoregulators are easy to program and are easily controlled remotely using mobile devices
Useful advice! As a stationary outdoor heater, you can consider purchasing an infrared umbrella designed specifically to create comfortable conditions in the yard.
Choosing a thermostat for an infrared heater
If we talk about purchasing and connecting a thermostat to an infrared heater as a separate element, then the main thing here is to make the right choice when buying. Using a small table, you can compare several of the most available models.
Brief description and cost of thermostats for heaters:
Model name | Features and characteristics | Cost, rub. |
Ballu RTR-E 6202 | Simple mechanical control. It is universal for use with any devices, and in any premises. | 1100 |
Ballu TA2N-S | Mechanical temperature control is combined with the on and off function. There is a diode light indicating the current state of the device. | 700 |
Eberle RTR — E6163 | Universal device, suitable not only for heaters, but also for connection to the floor heating system. It has a temperature adjustment range from +5 to +30°. | 1150 |
Eberle Instata 2 | A push-button model equipped with a small black-and-white display for setting the temperature. | 2850 |
Eberle Instat +3r | A modern model of an electronic thermostat that can be programmed. | 3600 |
What kind of model you want to purchase depends only on your desires and capabilities. The variety and functionality of the devices on sale can satisfy the requirements of even the most demanding buyer. Today you can easily purchase devices for your home or garden, as well as, for example, infrared heaters with a thermostat for a chicken coop or any other purposes.
It is difficult to underestimate the importance of using thermoregulators in the operation of heating devices. After all, it is not only about maintaining a comfortable temperature at any time of the year, but also about significant savings and safety. Especially considering the fact that everyone can buy the simplest mechanical thermostat.