Gas infrared heaters from the cylinder: features

Gas infrared heaters from the cylinder: varieties and features

There are such devices that do not require either a stationary heating system or a heat carrier for their operation. Their use is convenient in any conditions, even in the absence of any communications. Gas infrared heaters from the cylinder work at the expense of a propane reserve. And although this method of heating the room can not be called the safest, it is quite popular among a wide range of users. Let’s try to figure out why.

Gas infrared heater does not require connection to communication systems

Advantages of a gas infrared heater: consumer reviews

According to consumer reviews, the first and main advantage of heating with infrared gas heaters is the absence of connection requirements to any networks. In fact, such a heater can be installed anywhere.

All that is needed for the full operation of the device is a cylinder filled with liquefied gas. If you believe the reviews, gas infrared heaters for cottages may well work even if they are connected to a centralized gas supply system.

Outdoor gas infrared heaters

Manufacturers claim that such equipment can be used anywhere: in an apartment of a multi-storey building, in a private house, in a garage, in a greenhouse, etc. At the same time, the device is mobile enough and, if necessary, easy to transport. In addition, there are several types of heaters that allow you to choose the most suitable option.

All gas heaters can be of two types:

• those that heat the surrounding objects;
• those that give off heat to the air.

If we talk about infrared heaters, they work according to the following principle: objects are subject to heating, which, in turn, give heat to the air. This method is considered the most effective, but it has a significant drawback: objects that do not fall within the range of the device remain cold. It is pleasant to sit near such a heater, for example, while reading a book, but sufficient power of the device will be required to heat the whole room.

Outdoor infrared heater heats objects that give off heat to the air

Gas infrared heaters from the cylinder: the principle of operation

The use of infrared heaters has some special features. For example, in order for the device to cover a large area, it must be placed as high as possible above the floor surface. In this case, the range of its impact will be as wide as possible, and the room will be warm enough.

The gas infrared heater consists of the following elements:

• housing made of metal;
• heat exchanger;
• divider;
• automatic control unit;
• reducer.

As for the sizes of heaters, they can be very different: from small compact models to dimensional devices designed for large rooms, warehouses, garages, etc.

Design features of the Ballu outdoor heater

Pay attention! Keep in mind that some distance must be maintained between the heater and the gas cylinder. Otherwise, there is a risk of an explosion caused by a flame inside the device itself.

If we talk about the principle of operation of the device, then the following processes can be distinguished:

• gas flow from the cylinder to the reducer, where the gas pressure decreases, after which it enters the heater nozzle;
• mixing of gas with air and their joint entry into the ceramic panel;
• uniform gorenje gorenje and, as a result, the complete absence of by-products of combustion;
• heating of the ceramic component of the heater and further heat transfer through infrared radiation.

As a result of the fact that the device heats the objects surrounding it, the overall air temperature also rises. Therefore, infrared gas heaters are perfect for cottages, garages or greenhouses.

The principle of operation of the gas infrared heater

How to choose a gas infrared ceramic heater

Before you buy a gas infrared heater for a cottage or home, you need to familiarize yourself with a number of characteristics that determine the purpose of this device. Depending on the power, as well as the design features, each of the options is most suitable for specific operating conditions.

The main guideline when choosing gas heaters of infrared radiation is their safety, so here it is worth showing maximum caution and care. A mandatory requirement for the purchased model is the built–in automatic shutdown system, which is triggered when the product is tipped over or tilted strongly. Today, such a security measure is considered mandatory.

Pay attention! Another useful feature is the automatic shutdown of the gas supply in case the burner is accidentally extinguished.

In the choice, a serious role is played by where exactly the heater is planned to be placed. So, for residential premises, it is mandatory to have a special sensor that will indicate the level of carbon dioxide in the room. After all, during gorenje carbon dioxide is released, which can accumulate. In large quantities, it is unsafe for both health and human life.

Ceramic heating element of a gas heater

If there is a special sensor, the level of carbon dioxide in the room is regulated as follows: the device regularly takes a sample, determining the current level. At the same time, he checks it with the specified boundary. If the current level has reached the limit, the device automatically turns off.

How to choose an infrared heater for a cottage

In order to buy a gas infrared ceramic heater, it is necessary to focus on the mode in which its use is planned. Perhaps you will turn it on periodically when you come to the country for a few days. If long-term operation is planned, then the efficiency of the device will play a significant role, because its continued use will entail certain costs.

When choosing an infrared heater for a cottage, be sure to pay attention to the power of the device. There is a simple rule to be reckoned with here: the more powerful the device, the less mobile it is. And, accordingly, vice versa. A simple and lightweight device will never be able to produce the same power as a massive bulky heater.

The choice in this case is not affected by the total area of the room. After all, such devices do not heat the entire room, so its size does not matter. Think in advance where you will install the heater, and what area it will need to be heated.

Portable gas heater Kovea Cupid Heater KH-1203

Useful advice! It is always better to buy a heater with a reserve of power, and not use it in maximum mode. So you can, if necessary, heat a large area.

The appearance of the device will also play a big role, because everyone will want the heater to naturally fit into the environment and not create visual discomfort.
Despite all its advantages, an infrared heater still cannot be considered a full-fledged heating device if we are talking about permanent residence in the house. Its use is quite justified as an alternative option for short time intervals, or as an additional source of heat.

How to choose an infrared gas heater for a garage

Buying a gas heater for a garage is one of the most difficult tasks. After all, initially this room is filled with a large amount of combustible substances, which in combination with such equipment create a fire hazard. Therefore, more stringent requirements are imposed on the safety of gas equipment here.

A gas heater is perfect as a heat source for a garage

According to the type of construction, portable models are considered the most suitable for a garage, since if necessary, you can change the direction of the heat flow. Optimal in a room of this type may be the use of a ceiling gas infrared heater.

Useful advice! Think in advance about how the maintenance and repair of the gas infrared heater will be carried out. There should be a free approach to all its elements.

Gas infrared heaters with bottled gas: prices for popular models

Due to the fairly wide popularity, it will not be difficult to buy a gas infrared heater from a balloon.

Prices for some popular models of heaters:

If you use the reviews as a guide, the Ballu Bigh 55 gas infrared heater is also a very good option. It has a high power of 4200 watts, and also provides the ability to install the cylinder directly inside the device itself. Of course, this is reflected in its size.

Useful advice! If you want to buy a gas infrared heater for a greenhouse, then you need to choose among street models. Room heaters will not cope with this task.

How to make a gas heater for a garage with your own hands

The price of a gas heater for a garage is not always acceptable, and in some cases you have to rely only on your own strength. Independent design of heaters has been tested for a long time, and simple and understandable instructions have been compiled for craftsmen.

Homemade ceiling gas heater in the garage

Here are some simple rules that need to be taken into account even before you get started:

In order to make a high-quality heater with your own hands, you will need the following details: a sheet of metal, scissors, rivets and a riveter for their installation, a fine metal mesh, a sieve and a gas cylinder. In addition, you can not do without a special burner equipped with a valve.

First of all, it is necessary to attach a heater to the burner. To do this, a sieve attached to a metal sheet is circled with a marker. After that, parallel and perpendicular to each other, you need to finish drawing rectangular ears. At the same time, one of them should be 2 times longer than the others. Then, using metal scissors, you need to cut out the resulting pattern.

Kovea cylinder with gas isopropane mixture

After that, the elements need to be fastened together: the burner is bolted to a metal circle that has been cut out. The ears are wrapped in opposite directions, and a strainer is attached to them, which will perform the function of a diffuser. This is a ready-made element of a homemade heater.

Then you can proceed to fixing the metal mesh. For this purpose, it is necessary to draw a circle with ears on a metal sheet again and then cut it out. Next, it is necessary to fix the mesh, which is attached to the ears of each of the circles, forming a mesh cylinder.

Useful advice! It is most convenient to mount using rivets and a riveter. At the same time, you need to start with fixing the lower part, and only then move up.

When all the elements are ready, you can connect them together and connect the finished product to a power source.

Assembly steps of the Ballu BOGH-13 outdoor infrared heater

If you cannot manufacture the device yourself, then the main thing you should focus on when choosing a gas infrared heater from a cylinder is customer reviews, as well as the technical specifications specified by the manufacturer. Be sure to consider exactly where you plan to use it, as well as for what purpose. If you spend enough time choosing the right model, then the purchased device will surely meet all your expectations.