Electric infrared wall heater: manufacturer’s choice
Electric infrared wall heater: manufacturer’s choice
From this article, you can learn all the subtleties of choosing such a device as an electric infrared wall heater, taking into account the manufacturer’s characteristics, technical characteristics, advantages and disadvantages. For comparison, the most popular companies engaged in the production of heating equipment for the home, customer reviews and prices for appliances were used.
The infrared wall heater is convenient because it can be used both for rooms and for heating open areas
How is it more profitable to buy an infrared wall heater with a thermostat
Despite its relatively recent appearance, infrared heaters have won the love of consumers in a limited time, receiving positive feedback.
A considerable share of their popularity was provided by:
- affordable price (in comparison with other types of efficient heating equipment);
- low consumption of electrical energy;
- versatility and acceptable design;
- safety.
Infrared electric heaters are characterized by efficiency and economy
IR heaters are distinguished from oil and convection devices by the principle of operation. The heat generated by the radiator does not mix with the air in the room, as it happens with other types of equipment. Heat waves warm up objects in their zone of action, and already the air itself heats up from them.
Pay attention! Infrared emitters belong to the category of environmentally friendly devices. Their operation is accompanied by minimal negative impact on the human body.
The degree of heating is controlled by a thermostat, which can have an independent or built-in heater design. As soon as the temperature reaches the set value, the device automatically turns off. When the temperature drops, the heater turns on again.
Wall-mounted infrared heaters with Nikaten thermostat
Nikaten heaters are characterized by low energy consumption. In comparison with electric boilers, convectors and oil radiators, these devices consume 1.5-2 times less electricity. As a result, the total heating costs are reduced by almost 40%. The average period of work per day is 6-7 hours.
Heaters with a Nikaten thermostat heat the room with minimal electricity consumption
According to the manufacturer, heat transfer begins after 5 minutes after the device is turned on. For 20 minutes. the heater reaches the operating temperature. The designs provide energy-saving drives, thanks to which the cooling of the structure lasts at least 1.5 hours. At the same time, electricity costs are zero.
The devices are not only economical, but also suitable for any premises. They have a beneficial effect on health and do not dry the air at all. During the operation of the heater, uniform heating of the room is carried out. The structures themselves are fireproof, they are not afraid of water and overload.
Electric infrared heater wall mounted Zilon
The specialization of the Russian brand Zilon covers the production of a large segment of thermal equipment, which also includes heaters with an infrared principle of operation. In the process of creating its products, the company pays special attention to the requirements of consumers, and also takes into account the harsh conditions that accompany the operation of devices in Russia.
Panel infrared heaters manufactured by Zilon
Pay attention! The use of unique technologies allowed Zilon to occupy one of the leading positions in the domestic market. But this brand is not popular outside the country.
Zilon heaters cannot be called completely eco-friendly, but their harmful effect, like that of other types of infrared emitters, is reduced to a minimum. In the manufacturer’s assortment, you can find universal models with wall-ceiling mounting type.
Features of wall-mounted infrared heaters with a thermostat for giving NOIROT
NOIROT heaters have one distinctive feature: the hybrid products of the brand combine the capabilities of infrared emitters and convectors. Today, this French company is considered one of the most reputable companies engaged in the production of heating equipment. After the merger with the Muller group of companies, the brand increased the supply of its products to the world market.
Infrared wall mounted convector NOIROT
According to statistics, today its share in the European market is about 46%.
NOIROT offers consumers a wide range of heaters designed for:
- apartments;
- country houses and cottages;
- country houses;
- non-residential premises.
In the process of manufacturing devices, international standards are maintained in terms of environmental friendliness and quality. There is no need to install additional grounding for the operation of the products, the structures are completely protected from the negative effects of moisture.
Regardless of the modification, each model of the device has a reliable security system and a set of automation.
Overview of the manufacturer of infrared wall heaters for home Ballu
The BALLU Industrial Group produces a whole line of infrared emitters of the highest quality. These universal designs have a domestic purpose, but the devices can also be adapted for use in industrial conditions.
Heaters manufactured by Ballu are universal, they can be placed both on the walls and on the ceiling
The main part of the products of this company consists of devices with wall and ceiling type of placement. The manufacturer has endowed heaters with high capacities, as well as unique properties. BALLU does not stand still and is constantly working to improve its products. Therefore, the product range is not expanding, but changing. Outdated heaters are being replaced by newer, more advanced models.
All reviews left by customers on forums and websites with products are positive.
Pay attention! BALLU infrared radiators can act not only as additional, but also as the only sources of heat in the house. The devices can be used in accordance with the requirements and, if necessary, used as the main heating system.
Characteristics of infrared wall heaters for UFO cottages
The UFO company gives its heaters high-quality technical and operational characteristics, thanks to which these devices have so many advantageous advantages.
UFO infrared heaters can be completed with a foot for floor placement
The main advantages of UFO products:
- heating efficiency;
- no harm to health;
- the operation of the devices is based on the same principle of heating, as when sunlight hits the surface;
- instant heating of objects located in the area of the device;
- high degree of heat transfer;
- it takes only 30 seconds to transfer heat.;
- there are no odors, a comfortable climatic atmosphere remains;
- prevents the appearance of dampness, mold and fungi;
- heating is carried out evenly, in deep waves.
The manufacturer produces seven series of products and only two of them (UFO TYY and UFO LINE) do not have a thermostat.
The price of wall-mounted infrared heaters with a thermostat
Many manufacturers claim the quality, reliability and efficiency of their devices. To choose the best brand, it is necessary to compare not only the advantages and disadvantages of products, but also its indicators.
Comparative characteristics of products:
| Characteristics of the device | Brand and model of the device | ||||
| Nikaten 200 | Zilon IR-0.8 S | NOIROT Royat 2 1200 | Ballu BIH-L-2.0 | UFO Alf 3000 | |
| Power, kW | 0,2 | 0,8 | 1,2 | 2 | 3 |
| Area of action, m2 | 4 | 8 | 10 | 20 | 30 |
| Weight, kg | 7 | 4 | 1,3 | 3,5 | 3,5 |
| Size, cm | 2.5x60x30 | 4,2×12,5×119 | 11x12x45 | 9x18x74 | 9x19x108 |
| Price, rub. | 3500 | 2400 | 6500 | 3200 | 5100 |
UFO heaters turned out to be the most powerful and effective, taking into account technical indicators. A working device first heats the lower part of the room, then the upper one. Thanks to the thermostat and temperature sensor, the amount of electric energy consumed by a powerful heater is minimized.
Pay attention! If the device model and power level are selected in accordance with the conditions of the room, it is possible to reduce electricity costs several times.
Scope of application of UFO infrared emitters
Consumers can buy a UFO wall-mounted infrared heater for the following purposes:
- heating of locally located zones – residential and office premises;
- heating of rooms with significant heat losses – the lack of high-quality insulation in the room provokes strong drafts. Due to the fact that UFO devices do not warm up the air, but objects, drafts cannot affect the temperature of the heated room;
- maintaining an optimal temperature in rooms with high ceilings – with a ceiling height of 3 m or more, serious heating systems are required. For heating rooms of this type, an increased number of radiators is required, and therefore heating costs increase. UFO is able to replace an entire battery system;
- heating of limited industrial premises – servicing large supermarkets and industrial buildings will require a lot of costs, so it is more expedient to heat only part of the premises (those that are in dire need). These include staff rest rooms, rooms where the team spends a lot of time;
UFO heaters can be used both in industrial premises and in residential
- rapid heating of rooms where people stay temporarily – heating is used only during the operation of the room, the rest of the time the room is not heated;
- heating of buildings with small but frequent heat losses – hospitals, cinemas, hotels, shopping malls and cafes belong to this category of structures. Places of mass gathering of people for hygienic purposes are subject to frequent ventilation, so small heat losses are inevitable. To compensate for them, it is enough to purchase a UFO heater.
Pay attention! UFOs are widely used on the street: with their help, it is easy to warm up summer playgrounds belonging to restaurants and cafes.
How is it more profitable to buy a wall-mounted infrared heater of the film type
Film heaters with infrared radiation are in high demand among consumers for the reason that their range is extensive. There are even decorative devices on the market, which are compact and lightweight devices in the form of paintings that can be hung on the wall. They do not create problems with installation, since they can be installed on surfaces with different finishes. The devices are powered by electricity.
Flexible wall heaters are easy to operate and economical
Film heaters have one significant drawback – the optimal temperature in the room is maintained only during operation of the device. When the device is turned off, the temperature indicator drops again. Therefore, in order to create comfortable conditions, the heater must be constantly turned on.
Overview of wall-mounted film infrared heaters-Good Heat paintings
The company Good Heat adjusts its products to the needs of consumers, so the range of heaters is extensive enough to be able to purchase a device for rooms of different sizes.
Plastic wall modifications can be heated to a temperature of 50-60 ° C. It is possible to install devices even in children’s rooms, since the structures are completely safe. These panels have compact dimensions ranging from 500×500 mm to 500×1400 mm.
Film IR heaters Good heat is not only heating, but also interior decoration
In addition to plastic panels, the manufacturer offers wall panels “Velvet Season”, which are an improved modification of film heaters. Due to the increased power, efficiency and cheapness, these models significantly exceed the capabilities of other modifications. They are wall paintings with a pattern that can be applied to order.
Pay attention! If you accidentally touch the surface of a working device, the contact zone with the human body is automatically turned off. For this reason, it is impossible to get thermal damage to the skin.
It is allowed to hang such paintings in the area near the balcony or window. They will warm up the cold air that comes from the street. Thanks to the decorative design and compact dimensions, the panels will be able to support any interior style in the room.
The price of wall heaters-paintings of the Good Heat trademark
In the assortment of the company Good Heat there are many modifications of heaters, including film ones, decorated in the form of paintings or panels. All of them differ in size, appearance and technical characteristics. The table shows the main models of the assortment.
The price of heaters is Good Heat:
| Power, kW | Construction size, mm | Price, rub. |
| Summer time | ||
| 0,2 | 450×450 | 1750 |
| 0,35 | 470×670 | 1900 |
| 0,48 | 450×950 | 2150 |
| Kind warmth | ||
| 0,12 | 500×500 | 950 |
| 0,2 | 500×850 | 1200 |
| 0,35 | 500×1400 | 1450 |
| Good Heat (fiberglass) | ||
| 0,12 | 500×500 | 1100 |
| 2 | 500×850 | 1300 |
| 0,35 | 500×1320 | 1450 |
| 0,15 | 500×450 | 1000 |
| 0,25 | 500×700 | 1250 |
| 3 | 500×850 | 1300 |
| 0,45 | 500×1150 | 1450 |
| 0,52 | 400×1400 | 1600 |
Features of Infrared Wall Heaters-Trio Paintings
The Ukrainian company Trio specializes in the production of heating equipment using carbon fiber. SUPER infrared heating panels with wall-mounted placement are particularly popular. They are distinguished from other modifications by a fairly high level of power. This indicator reaches 0.5 kW, which is quite a lot for heaters of this size (570×1140 mm).
Advantages of the SUPER film heater:
- safety for humans, the possibility of burns is excluded;
- a working device emits soft heat;
- the natural composition of the air is preserved;
- reduced energy consumption (the device requires 4 times less electricity than other heaters);
- the design does not create problems with transportation, folding is allowed.
Trio wall-mounted film heaters allow you to apply any pattern according to your desire
In rooms up to 15 m2 in size, the SUPER film heater is able to raise the temperature by 6-8 °. The device has 4 operating modes that allow you to switch power according to the requests of the room and the people in it. The maximum surface heating temperature is 75 °C. The size of the panel in the collapsed state corresponds to 100x100x570 mm. The total weight of the structures is 0.8 kg.
Pay attention! The panel itself is transparent, you can put any custom drawing on top of it, including family photos. The manufacturer has equipped the heaters with holders made of natural wood.
Overview table of the SUPER heater:
| Characteristics of the device | Indicator |
| Heating element area, m2 | 6 |
| Construction weight, kg | 0,74 |
| Heating period to operating temperature, min. | 1 |
| Protection class | II |
| Price, rub. | 1200 |
Overview of Infrared film wall heaters Neirs
Neirs company is engaged in the production and development of economical heating systems based on infrared radiation. The film products of this brand have a fairly wide application and are suitable not only for apartments, but also for private houses, dachas and cottages.
Neirs infrared film heaters, designed for hanging on the wall, are represented by a whole series of paintings that differ from each other in pattern and size.
Characteristics and price of Neirs wall-mounted infrared heaters:
| Device size, mm | Power level, kW | Area of action, m2 | Price, rub. |
| 700×800 | 0,21 | 6 | 6000 |
| 600×1000 | 0,21 | 8 | 6700 |
| 500×1200 | 0,21 | 9 | 6700 |
| 400×1600 | 0,21 | 9 | 7000 |
| 600×1100 | 0,21 | 9 | 7100 |
| 750×1100 | 0,21 | 10 | 7600 |
| 600×1500 | 0,42 | 10 | 8000 |
| 950×1100 | 0,42 | 14 | 8400 |
| 1100×1100 | 0,42 | 15 | 9500 |
Despite the fact that the thickness of the radiator film does not exceed 1 mm, and the assembled structure takes up little space, the manufacturer Neirs took care of the presence of a thermostat. The transmitting modular part is hidden behind the picture. The signal is transmitted by radio waves emitted by a wireless temperature controller.
In addition to the possibility of choosing the design, the buyer can choose the material for the manufacture of holders.
Advantages and disadvantages of film heaters
Film devices, like other types of heaters, have both advantages and disadvantages.
Advantages of film emitters:
Structure of infrared film heater
Useful advice! In order to ensure full-fledged heating of the room with the help of infrared heaters, experts recommend giving preference to film options designed for installation on the ceiling or on the floor, for example, the “Underfloor heating” system.
Disadvantages of film heaters:
Tips for choosing film wall heaters
Recommendations for the selection of wall film devices:
In terms of technical characteristics, the Neirs film heaters showed themselves best. They have a sufficiently high power, are able to warm up the area of the premises almost at the level of conventional radiators. As well as the Trio devices, they provide customers with the opportunity to independently select an image to be applied to the surface.
