Beds with your own hands are not like everyone else’s: interesting ideas for country design

Beds with your own hands are not like everyone else’s: interesting ideas for country design

From this article you can learn how to make beds with your own hands, not like everyone else: interesting ideas for creating a beautiful suburban area with an unusual design, successful examples and photos, step-by-step technologies and recommendations. The information will help you navigate in choosing the right design, material and consider the size, as well as the nature of the placement of beds for growing vegetable crops.

High beds and an interesting design of the working area will make the garden neat and beautiful

Beds with your own hands are not like everyone else’s: interesting ideas and recommendations for their implementation

Most often, beds for suburban areas are classified according to the type of material on the basis of which they are made. However, the aesthetic and functional aspects of the issue are of no small importance. Therefore, before proceeding to the choice of material, it is necessary to determine the shape of the beds, their purpose and location on the site.

With the right combination of plants, even on a small plot of land, you can get a generous harvest

The planning stage is extremely important. On the web, you can find many successful photos of the design of beds in the garden for use on your site. Careful planning of the upcoming construction and drawing up an outline will save you from mistakes in the future, will allow you to optimize the work and get a beautiful neat vegetable garden.

Recommendations for designing the design of a vegetable garden with beds

In areas with a small area, it is recommended to select an angular version of the beds. In such situations, radial or radial splitting schemes will be optimal. Plantings distributed in a radial pattern will also look good along the fence. They will perfectly fit into the design of the plot, even if you include them in the design of the area in front of the house.

An example of the French placement of high beds in the garden

If the area of the suburban area is large enough, then the central path will be the optimal place for arranging the beds. Rectangular or circular structures can be installed along it.

Useful advice! Flowerbeds with flowers can easily replace beautiful beds created with their own hands, photos of homemade structures with planted cabbage, pumpkin or salads of different varieties look no worse. A combination of plants of various colors turns out to be spectacular.

If you plan to plant various vegetable crops, you should definitely take into account the compatibility of the selected plants, otherwise you can not hope to get a large harvest from the beds. Especially for these purposes, there are compatibility tables, which contain information about how successful the neighborhood of certain vegetables and plants will be.

Thanks to the paths, you can access the plants from different sides without stepping on the ground

Creating beds in the country with your own hands: how to make structures of optimal size

Not the last place in the design of beds is given to their size – height, length and width. The dimensional parameters of the products have a direct impact on such nuances as:

• yield;
• protection of plantings from freezing;
• appearance of the beds;
• the level of complexity of construction;
• the plant care system, its simplicity.

When designing beds, it is necessary to take into account the minimum amount of land needed for certain plants

The width of the structures can be any. Most often , standard parameters are used – 80-90 cm . This is quite enough to plant plants in 3 rows. The beds, whose width does not exceed 90 cm, are convenient to use, since a person can reach its central part from either side on the sides. Therefore, if it is supposed to arrange narrow vegetable beds, it is not more convenient to come up with an option. Especially when it comes to planting plants at the fence itself. In this case, it is better to organize beds whose width does not exceed 50 cm. This will greatly facilitate the care of plantings.

The height of the bed should be selected more carefully. Plants planted on an elevation are susceptible to freezing. This mainly concerns perennials, because the snow layer that protects planting from frost accumulates in greater quantities at ground level. This system does not work on high beds, so they should be used exclusively for planting annual plants. Perennials feel better if the height of their beds does not exceed 15 cm.

Perennial plants can be planted in separate boxes, which will simplify working with them for the next year

Creating decorative design for garden beds in the country with your own hands: photos of beautiful paths

During the design of the beds, you need not forget about the paths between them. Tracks can be made in different ways. Most often , for the arrangement of paths , it is used:

• lawn grass;
• crushed stone;
• stone or paving slabs.

In a functional sense, the paths differ little from each other, so their design is usually based on the personal preferences of the owner of the site.

A beautiful path will make the garden not only attractive but also convenient to care for

Pay attention! It is desirable that the paths are in harmony with the material for the beds. If these products are wooden, the paths can be sown with lawn grass or decorated with round tree slices. For beds made of stone or brick, tiles, paving stones or crushed stone are suitable.

The paths on the site will serve as transport arteries, and will also decorate the garden, making it harmonious, neat, well-groomed.

The most common materials for making beds are stone, boards, bricks. Finished products made of zinc-coated steel or plastic are popular. Often structures are made of flat slate for beds.

The easiest way to decorate the paths for the garden is to cover with fine gravel

How to make a beautiful fence for beds on the site with your own hands

Instructions for creating fences for beds are universal. First, the soil is prepared, then it is leveled. Marking is applied along the perimeter of the bed. After that, according to it, the material selected for the fence is installed. Some summer residents prefer to buy a flat slate for the garden. Lovers of natural materials will like wood and stone. Plastic, brick and metal have optimal characteristics. Unusual gabion designs are a vivid example of a combination of metal mesh with brick or stone.

When creating curbs for the garden with your own hands, you should adhere to certain rules:

An example of a beautiful fencing of beds on an uneven ground surface

The aesthetic side is also important. It is desirable that the fence be concise and optimally fit into the landscape design of the site.

Examples of unusual beds in the country with your own hands: photos and recommendations

The beds are suitable for growing vegetable crops and herbs. With a successful design, they can compete even with flower beds and flower beds in terms of decorativeness, offering not only beauty, but also harvest.

Pay attention! There are many design options for creating beds with your own hands, photos of the most successful examples can be safely used for inspiration. It is enough just to turn on the imagination.

You can handle the implementation of some interesting ideas yourself:

• high beds are a great option for those who do not want to bend low. This type of construction contributes to the rapid warming of the soil and accelerated growth of plantings;
• round – require scrupulousness during the design and planting of plants. Tomatoes, carrots, cabbage and radishes, as well as beets will look spectacular on them;

High slopes can also be used for planting fruit-bearing plants and seasonings

• multilevel or “matryoshka dolls” are used on small plots in order to save space;
• ladders – boards are used for construction. This type of beds is ideal for areas with hilly terrain;
• vertical – most often such structures are represented by fixed boxes made of wood for seedlings or beds for strawberries made of plastic pipes. The products are fixed vertically on the wall, which saves space. Designs allow you to grow only certain types of plants. In addition to strawberries, it is allowed to grow cucumbers, lettuce, onions and greens in them;
• suspended – designed for growing strawberries or greens. It is convenient to take care of them, since you do not need to bend over.

Related article:

Border tape for beds: beautiful framing of garden elements

Advantages and disadvantages of fences. Types of products for the garden by type of material and purpose, performance characteristics.

For the arrangement of beds, you can use any materials at hand. Even car tires, aluminum containers, wooden or plastic boxes, barrels are suitable.

In high boxes, you can organize warm beds, which differ in earlier warming of the soil

How to create a strawberry bed with your own hands: photos and manufacturing technology

Vertical or wall-mounted beds are suitable for growing strawberries. They make it possible to control the amount of moisture. Strawberries do not like waterlogging and deteriorate quickly, and the wall version of the products is able to create optimal conditions for its cultivation. In addition, the sensitive root system of the plant will be reliably protected from freezing in early spring and sudden temperature changes.

Pay attention! Vertical beds can be wrapped with spunbond, the price per meter of this material is much lower than the cost of the film for covering the beds.

PVC pipes can be used to build a convenient structure for growing and harvesting strawberries

The advantages of wall and hanging beds include significant space savings. To install structures, you can use:

• a veranda or a terrace;
• the space along the fence;
• the wall of the summer kitchen or utility annex.

The average cost of a spunbond:

To grow strawberries, you can make a bed of plastic pipes, car tires, bags, cylindrical containers, mesh, bottles and other materials.

To save space, you can grow strawberries in vertical pipes around the perimeter of the fence

How to make a strawberry bed with your own hands from car tires

The size of car tires to create a bed is not important. If the tires differ in size from each other, you can make a multi-tiered structure.

Car tires are first prepared for work: thoroughly cleaned, washed and dried. After that, the material is painted in any color you like. On the sides, holes are made at the same distance. Their size should be sufficient so that strawberries can be planted. In order for the structure to be stable, a plastic pipe is needed. Its length should correspond to the height of the future bed. Holes should be made along the entire circumference of the pipe for its entire length.

One of the popular ways of growing strawberries among gardeners is the use of old car tires

Next, the installation of the first tire is carried out in the area where the bed will be located. A plastic pipe is installed vertically in the center, the space inside the tire is filled with soil.

Pay attention! Previously, the pipe should be wrapped with a synthetic cloth.

The remaining tires are stacked on top of each other in a similar way and filled with soil. When the bed is ready, the pipe is filled with water. Through the holes made in it, the liquid will flow into each tier of the structure. It remains only to plant strawberries in the holes in the tires.

How to make a strawberry bed from a pipe yourself

For the arrangement of such structures, plastic pipes that could remain in the house after repair are suitable. You will need two types of pipes to work. The diameter of one of them is 2 cm, and the second is 15 cm or more. In a pipe with a large diameter, holes should be made with a size that allows you to plant strawberries. In a smaller pipe, small holes are made for watering plants.

For horizontal cultivation of strawberries in pipes, it is necessary to take care of the irrigation system, for this you need a built-in hose and water under pressure

The length of the pipe can be any. This parameter depends on the design of the bed, which can be made out of a large number of segments (length 0.5 m), fixing them in a checkerboard pattern on a wall or grid, or using several long pieces. A plastic product smaller in diameter is inserted into a large pipe, and the space between them is filled with soil.

The advantage of vertical beds for planting strawberries is that modern plastic is resistant to sunlight. It does not overheat, and the structure itself is easily fixed in any convenient place.

Interesting fact! Plastic and the first products made on the basis of it appeared as substitutes for natural materials. Scientists were looking for an alternative to the use in the production of such expensive raw materials as mother of pearl, wood and ivory. Rubber was used for the manufacture of organic plastics. The synthetic analogue used today was obtained at the beginning of the XX century, thanks to the use of phenol-formaldehyde resins.

For a rich strawberry harvest, the beds should be placed on the sunny side of the plot

Making multi-tiered beds for strawberries with your own hands

It is also possible to grow strawberries on high beds. For these purposes, designs in the form of racks are suitable. It is not uncommon to see beautiful photos of beds in a greenhouse in the form of racks made by hand or bought in a store. Moreover, not only strawberries are grown in such structures, but also other types of plants. Ready-made racks can be used as shelves for placing pots or containers with strawberries. If you install these structures inside the greenhouse, the berries will ripen faster.

Multi-tiered flowerbeds-racks can be made independently by constructing a pyramid from boxes of different sizes. For the manufacture of structures, wooden boards are used, from which products of square or rectangular shape are knocked down. The dimensional parameters are selected with the expectation that later the boxes will be installed on the principle of a matryoshka doll one on top of the other. As a result, the largest product will be at the base of the pyramid, and the smallest one will be at the top.

The boxes are filled with earth, where the seedlings are planted. When the strawberry bushes grow, the structure will turn into a blooming pyramid. Wood products can have a more unusual shape. The beds in the form of an octagon look very impressive.

A pyramid for growing strawberries can be purchased in special stores or made yourself

Useful advice! A multi-tiered bed can be made from improvised means, for example, plastic bottles. To do this, the product is cut lengthwise. It is necessary to cut a rectangle in the side of the bottle so that the neck with the lid and the bottom remain intact, otherwise the earth will spill out. Bottles form dense rows of beds on the wall of the building or on the fence. To save space, you can mark one row above another.

Technology of making strawberry beds from bags

The simplest way to organize vertical beds with strawberries is to use bags for these purposes. This method is economical. To arrange the beds, you will need to purchase bags made of high-density polyethylene. Ordinary products made of burlap or handmade from any dense material are also suitable.

Products made of natural materials are durable and environmentally friendly, they are better perceived by plants because they have excellent throughput. If the bags are made by hand, it is recommended to strengthen the bottom and sides by additionally stitching with strong threads. After the products are ready, they need to be filled with soil and cut 15 cm long. Strawberry bushes will be planted in them. A strong loop should be attached to the top of the bag to fix the bag on the support.

After planting the plants, they must be watered. The bags themselves are staggered.

An example of using the technology of growing strawberries in bags, which allows you to pick berries clean — without sand and earth

How to create a bed of slate with your own hands: photos and recommendations

Slate is very easy to use, so summer residents are willing to create beds for vegetables and herbs based on it. Such structures keep the earth well within a clearly marked zone. At the same time, the beds look neat and attractive.

Advantages of asbestos cement slabs:

Useful advice! If desired, asbestos cement sheets can be painted in any color you like to improve the design of the site.

Neat beds made from the remains of slate

In addition to the advantages, the material has disadvantages. Many experts note the harm of flat slate for beds, because due to overheating, the products contribute to accelerated evaporation of moisture from the soil, which negatively affects plants in the heat. In addition, during the rains, soil erosion occurs and light slate sheets tilt, so the owner of the site will need to constantly adjust their position.

The technology of making beds of slate with your own hands

Asbestos cement sheets with waves are used as a finishing material for the roof. The remains of the product can be used for the arrangement of beds on the site.

The order of production of beds of wavy slate:

Slate is a resistant and at the same time fragile material, so you need to be careful when working with tools

Slate sheets can have horizontal or vertical wave placement. If material with horizontal waves is used in the construction of beds, the shoots of some plant species will run along the depressions. Therefore, you should carefully dig up the soil so as not to damage the fence.

Useful advice! To get rid of such difficulties, you can use slate with vertical waves, but this type of material is more difficult to cut.

The technology of making beds of flat slate with your own hands

If it is planned to manufacture structures from wavy sheets, then the construction of beds will be accompanied by a minimum amount of waste. In this sense, a flat slate is less convenient and practical. It is recommended to use asbestos cement sheets, the length of which is 1.75 m, for the production of beds.

Slate for making beds can be purchased in the form of ready-made sheets

The process of making beds looks like this:

Beds made of flat slate can be dismantled if necessary and moved to another convenient location

Important! Slate is considered a strong enough material, but it has a fragile structure. It is not allowed to drive asbestos cement slabs into the ground, otherwise they will break. Therefore, the material is installed only in the way described in the technology.

Purchase of slate sheets for beds: the price of products and preparation for use

For cutting asbestos cement sheets, it is better to use a grinder. This type of tool copes with cutting any materials, including slate, pipes, iron, etc.

There is one nuance when working with a grinder. During the cutting of the material, the tool must be deployed so that the dust blown away by the wind flies to the side.

Asbestos cement dust is dangerous for human health, therefore, in the process of working with sheets, it is necessary to wear protective glasses and a cotton-gauze bandage. It is strictly forbidden to use a saw designed for working with wood for cutting slate. A person in such conditions risks serious injury.

The earth in beds of asbestos cement sheets heats up faster, so plants yield earlier than on open soil

Most often, the remains of slate are used for the construction of beds after the roof of the building is covered with it. This applies to wavy sheets. The assortment of many stores allows you to buy ready-made strips for beds made of slate.

Average prices for asbestos cement strips for beds:

Greenhouse arrangement: how to make beds in a greenhouse, photos and recommendations

A competent choice of greenhouses and proper arrangement of beds provide a rich harvest. Greenhouses with a size of 3×6 m are in high demand among summer residents . This option is optimal if the site area is small. Most often, greenhouse houses are made of polycarbonate sheets. The material has high strength (stronger than glass), has good throughput, while scattering direct sunlight. Such structures are easy to assemble and disassemble, convenient to transport due to their mobility and light weight.

Pay attention! The greenhouse can be made of materials such as glass, wood, film. In stores, you can buy ready-made designs or create them yourself.

For growing seedlings in a greenhouse, it is very convenient to use racks with pull-out shelves

Features of the arrangement of beds in a 6×3 greenhouse: photos and tips for placing structures

Land owners often resort to the use of greenhouses 3 by 6. How to arrange the beds inside such structures at the same time, worries many summer residents. Incorrect placement of plantings relative to the cardinal direction or miscalculation in relation to wind loads can lead to a decrease in yield or death of seedlings.

When starting the interior arrangement of the greenhouse, it is recommended to focus on the cardinal directions:

High beds are very convenient for small greenhouses — this allows you to grow different plants nearby

Popular schemes for placing beds in a 3×6 greenhouse: photos, how to make an optimal layout

A competent layout inside the greenhouse house allows you to optimize the space and get a large harvest from planting. For this reason, summer residents and gardeners strive to maximize the use of all available space.

Useful advice! The optimization of the space should be competent, so that later there will be no problems with the care of plants. It is not necessary to make a large width of beds in a greenhouse with a width of 3 meters. Large structures will complicate the process of caring for plants. When planning the construction of beds, it is necessary to take into account the physical capabilities of a person.

An example of successful zoning of beds in a greenhouse with bricks

Popular schemes for placing beds inside a greenhouse house:

An example of a popular arrangement of beds in a small greenhouse

The interior layout of the greenhouse house largely depends on the vegetable crops and plant varieties that will be grown. Each variety of seedlings needs a certain microclimate, so it is necessary to select crops with similar needs.

Creating beds in a greenhouse with your own hands: alternative methods of placing structures

When choosing the optimal placement for beds in height, it is necessary to take into account the climatic conditions of the region. This indicator varies between 20-50 cm . As a result, unhindered access to plants is provided, and the likelihood of accelerated drying of the soil is eliminated. Polycarbonate, brick, board or slate are usually used for the construction of such beds. To increase productivity, it is recommended to lay waste on the bottom of structures. Splinters and rotten tree bark, deciduous or straw filler, dust will do.

In a narrow greenhouse, plants can be grown at different levels, which saves space

Useful advice! If the waste is poured with boiling water and covered with manure on top, the fermentation process will start, rotting and heat generation will accelerate. As a result, plant growth and crop quality will improve.

Vertical placement of beds in the greenhouse will save useful area and increase the volume of harvest. Structures can be arranged in several ways:

• garters – the method is used for growing crops that need a garter to the supports. To create a vertical surface, you can use a partition, a plastic mesh or a shield. In the process of growth, the plants stretching upwards will cling to the base;
• shelves – constructions in the form of boxes are placed on top of each other. The height is adjusted to the needs of plants. It is advisable to use this method for low crops with a superficial root system;
• plastic pipes – holes are made in the products, where the soil is filled in, and plants are planted. Such beds are fixed in an upright position, suitable for strawberries and strawberries.

If the size of the greenhouse allows, you can additionally install racks with boxes

Spring preparation of beds for various vegetable crops

The yield of the bed depends on many factors. To achieve good results, it is important to prepare the place correctly.

The cultivation of each individual crop has its own nuances. For example, preparing a carrot bed in the spring will be easier to do if you do all the necessary work in the fall. In order for the harvest to be rich, it is recommended to mix a little sand into the seeds. To grow cucumbers, you will need to add a lot of compost to the soil, and not fresh, but prepared in advance. By steaming the earth with boiling water, you can get rid of harmful microorganisms. For these purposes, a pinkish solution of potassium permanganate is also suitable.

The process of preparing a bed for onions in spring practically does not differ from the scheme according to which carrots are planted. These crops have similar growing conditions and can become excellent neighbors. It is also recommended to mix a small amount of sand with onion seeds. Subsequently, it will facilitate harvesting. Garlic needs mineral fertilizers and a lot of sun, and tomatoes like organic fertilizers. To obtain a rich potato harvest, double digging of the soil in autumn and spring will be required. Beetroot grows well on the ground with compost or humus.

Proper preparation of plants and soil for planting will ensure a high yield

How to properly prepare a harvest bed: video review

https://www.youtube.com/watch?enablejsapi=1&autoplay=0&cc_load_policy=0&iv_load_policy=1&loop=0&modestbranding=0&fs=1&playsinline=0&controls=1&color=red&rel=1&autohide=2&theme=dark&” class=”__youtube_prefs__ no-lazyload” title=”YouTube player” allow=”autoplay; encrypted-media” allowfullscreen data-no-lazy=”1″ data-skipgform_ajax_framebjll=””>