220V thermal electric gun: an overview of the best heaters
220V thermal electric gun: an overview of the best heating devices
From this article, you can find out what features the 220V thermal electric gun has and tips on choosing the optimal device, taking into account the main criteria: technical characteristics, the purpose of the heated room and the operating conditions it has, consumer reviews, prices and other parameters. The text contains an overview of the most popular manufacturers and models of electrical devices.
Electric heat guns are designed for rapid heating of premises
220V thermal electric gun and its device
High-quality heating of large premises: garages, basements and other spaces will be provided by 220 Volt electric heat guns connected to the network. These devices have a high power rating, thanks to which they are able not only to quickly dry and warm the air, but also to preserve the result for a long time.
Heat guns are mobile, which allows you to use one device for heating different rooms: baths, cottages or a workshop
An electric gun is a heating equipment with a mobile or stationary design. These devices have an industrial and domestic purpose.
The scope of their application extends to the heating of the following objects:
- storage areas;
- residential premises;
- garages;
- construction sites;
- production shops, etc.
The assortment of modern stores includes devices designed for connection to a three-phase and two-phase network. Therefore, consumers have the opportunity to buy an electric 220V and 380V heat gun. Networks with two phases are widespread almost everywhere, mainly in urban apartments. Their voltage is 220V. Three-phase communication options are used to feed industrial facilities. In rare cases, houses from the private sector are powered from networks with a voltage of 380V.
The device of a thermal electric gun
Pay attention! Electrical appliances are eco-friendly and safe. Their operation is not accompanied by the release of exhaust gases and toxins. Therefore, it is allowed to use an electric gun to heat residential premises without endangering human health.
The principle of operation of the 220V electric heat gun
The heat gun, which is powered by electricity, has a simple principle of operation. It is a ventilating device equipped with an air heating function. In addition to standard devices, there are guns with infrared heating principle. Heat transfer in them is carried out through the use of IR rays. Electrical devices are designed for rapid heating of small areas. The exception is industrial electric heat guns, which have a high level of power and performance.
Standard products consist of the following components:
- heating element;
- ventilation device;
- temperature controller.
The principle of operation of an electric heat gun
Each of these components performs a specific function. The heating element can be of two types: tubular (TEN) and spiral. The first option is used much more often because it has a longer service life than the spiral. In addition, the heating element burns out less oxygen in the process of heating the room.
The ventilating device generates air flows that pass through the heating element, and the thermostat regulates the room temperature. This component protects the structure from overheating. When the air temperature reaches the required value, the thermostat automatically turns off the power supply.
Choosing a heat gun: photos and prices of popular models
Electrical appliances can be used to heat small buildings that do not have the conditions for the arrangement of a full-fledged heating system or its construction will be impractical. Alternatively, you can purchase a heat gun in the garage, workshop or utility room. It is able to provide the necessary level of heating in the rooms where a person is from time to time.
With the help of a thermal electric gun, you can heat a small room, but the device cannot replace full-fledged heating
In addition, electrical appliances are widely used in construction. With the help of them, you can effectively heat the construction site, as well as reduce the drying time of surfaces after finishing. The capabilities of electric guns will be useful during wet construction work.
On an industrial scale, the use of guns extends to premises that are often used by people, for example, shops, waiting rooms at train stations and airports, offices, etc. For example, the capabilities of the electric heat gun Ballu BKX-3 or Zubr ZTP-2000-M2 are enough to heat rooms with an area of 25 m2. Any of these models can heat a pavilion, a small office or a living room.
Pay attention! The power of 1 kW is enough to heat an area of 10 m2.
The Ballu BKX-3 heat gun is often used as a heating device in rooms that are deprived of the constant presence of people.
With the help of the Zubr ZTP-2000-M2 heat gun model, it is possible to heat a room with an area of 25 m2
Such objects include:
- storage areas;
- production facilities;
- hangars and bases;
- utility rooms, etc.
Buyers in most cases have a positive impression of using the Ballu BKX-3 heat gun, the reviews left on the forums reflect the advantages of this model:
“The Ballu cannon purchased last month completely changed my opinion about these devices. The compact and lightweight design heats the room quickly enough. At the same time, the purchase of the device was inexpensive. I use it to heat the premises at the construction site so that the workers have somewhere to warm up during the break. Sometimes the start button gets stuck in severe frost. But I don’t think this problem is so significant.”
Victor Martynyuk, Moscow
Most user reviews about the operation of the Ballu BKX-3 heat gun are positive
The power of the Ballu BHP-M-5 heat gun is enough to heat a production site or a living room with a size of 45-50 m2. The device is ideal for garages, industrial premises and workshops. All controls are located on the front panel of the structure, which makes its operation more convenient. That’s why this model is so popular.
What to choose a heat gun for a garage: optimal models
The capabilities of the Master B 22 EPB heat gun allow you to effectively warm up the premises of garages, car workshops, storage areas and hangars. The design has a capacity of 22 kW. Moreover, this indicator can be adjusted by setting the settings in the range from 11 to 22 kW. The gun is economical and equipped with a built-in air flow regulator.
Advantages of Electric heat gun for garage:
- the case is made of stainless steel with an increased margin of safety;
- there are no odors;
- the device does not burn oxygen out of the room during operation;
- the work is accompanied by a minimum noise level;
- the presence of a built-in thermostat;
- ergonomic design.
The Master B 22 EPB heat gun is often used to heat garages and utility rooms in production
The manufacturer’s recommended voltage for this model of thermal electric gun is 380V. The disadvantages of the device include only a short power cord, which significantly limits the areas available for placing the structure in the room relative to the outlets.
For heating the garage, the Ballu BHP-M-3 heat gun, which is powered by a 220V mains, is also optimally suited. This model belongs to the category of professional heating devices.
Advantages of the model:
- two-stage power adjustment;
- availability of air ventilation mode without heating;
- safe operation that does not require supervision, thanks to the option of manual restart of the thermostat;
- the grilles and supports are treated with a wear-resistant vandal-proof coating.
The Ballu BHP-M-3 heat gun is equipped with the option of manually restarting the thermostat, which allows you to use the device without supervision
This gun, with a capacity of 3 kW, can fully heat a room with an area of 35 m2.
Pay attention! The design has two mounting methods: desktop and floor. Especially for this, the manufacturer has provided for the availability of appropriate fasteners.
This does not end the list of advantages of an electric heat gun, the buyer’s feedback from the forum displays the advantages identified during operation:
“Despite its compact size, the Ballu BHP-M-3 cannon perfectly heats the room. The airflow from the fan side is strong enough. The unit is ideal for a garage and similar premises, although I would not use it as a heat gun for a house. In my opinion, the device is quite noisy for living rooms. The optimal ratio of cost and quality. I advise you to buy it.”
Konstantin Birkin, Moscow
The Ballu BHP-M-3 heat gun has a convenient handle, thanks to which it is possible to safely move the device or redirect the flow of warm air
Which is better to buy an electric heat gun for home
In residential buildings and apartments, thermal electric guns Resanta TEP-2000 and TEP-2000K are often used as an alternative replacement for a centralized heating system that does not provide the necessary heating. The Resanta trademark is a certified Russian manufacturer that produces designs of various price segments and power levels.
Related article:
Diesel gun thermal: device, pros and cons, possibilities
Features and characteristics of diesel appliances, types of designs, their advantages and disadvantages. Repair and selection of equipment.
Advantages of the Resanta TEP-2000 heat gun:
- economy;
- adjustable power;
- built-in regulator with three air supply modes;
- the case has a durable and wear-resistant protective coating;
- special technology of Aerodynamic Control;
- low cost;
- built-in overheating protection function.
The Resanta TEP-2000 heat gun has three hot air supply modes
The following disadvantages were noted by consumers during operation:
An electric heat gun Zubr EXPERT Kvadrat ZTPE-3000-M2 can be used to heat rooms for various purposes. The design has a strong and reliable housing. The gun is able to warm up an area of 30 m2. The device is protected from overheating thanks to a fuse. Heating is carried out by a tubular element made of stainless steel.
Advantages of the design:
- purge function before shutdown, extending the service life and providing protection against overheating;
- recovery reset button for fuse;
- thermoregulator of capillary type with high accuracy of action;
- smooth temperature control system;
- high-power engine.
Electric heat gun Zubr EXPERT Square ZTPE-3000-M2
Pay attention! The design is equipped with an additional protective shield that prevents overheating of the body part.
Many consumers have noted the advantages of this heat gun, reviews confirm the advantages of the EXPERT Square ZTPE-3000-M2 model:
“The gun is powerful, but very quiet. I didn’t notice any shortcomings. My husband and I bought this model for the country two years ago. The device works all this time without any problems. The purchase paid off.”
Marina Mozgovaya, St. Petersburg
“The Bison cannon works very quietly. The efficiency factor for 3 kW is palpable. The cost is slightly overpriced, but the quality matches the price. The structure is operated daily for 6 hours. All parts are intact, do not melt, do not burn. I recommend this model to everyone.”
Yaroslav Sidorenko, Moscow
The model of the heat gun Zubr EXPERT Kvadrat ZTPE-3000-M2 is equipped with a protective screen that prevents overheating of the body part
The best Electric Heat guns for construction purposes
The manufacturer Ballu produces heating equipment for both domestic and professional use. The Ballu BHP-P-5 heat gun is perfect for drying indoor air, as well as treated surfaces. Like most professional heaters, this model has many advantages.
Advantages of a heat gun:
- fast room heating and drying;
- several operating modes (half and full heating mode, ventilation);
- increased working life of parts;
- the heating elements are made of stainless steel, so that the service life of these elements is 25,000 hours.;
- built-in thermostat to protect the structure from overheating;
- internal security system;
- the angle of inclination of the structure is adjustable.
The Ballu BHP-P-5 heat gun can be used to dry indoor air, for example during repairs
The capabilities of the Ballu BHP-P-3 heat gun can be successfully used for construction and repair. The maximum power of the structure is 3 kW. The device is able to fully heat an area of 35 m2. The maximum continuous operation time is 24 hours.
Advantages of the BHP-P-3 model:
- the elongated shape of the body, which provides the ability to direct air flows to the desired area;
- the surface of the housing does not overheat due to double walls;
- two-stage power control system and ventilation mode, which is not accompanied by heating;
- built-in thermostat.
The supports and rims of the structure are protected by an anti-vandal coating, which is characterized by high wear resistance.
The Ballu BHP-P-3 heat gun is capable of heating a room with an area of 35 m2
Average prices of 220V thermal electric guns
One of the criteria that is important for buyers is the cost of devices. This indicator depends on the quality of the product and the manufacturer, the power level and other technical indicators of the device.
Average prices of electric heat guns:
| Brand and model of the device | Price, rub. |
| Ballu BKX-3 | 1400 |
| Resanta TEP-2000 | 1770 |
| Resanta TEP-2000K | 1850 |
| Ballu BHP-M-3 | 2350 |
| Bison ZTP-2000-M2 | 2440 |
| Bison EXPERT Square ZTPE-3000-M2 | 2470 |
| Ballu BHP-M-5 | 3520 |
| Ballu BHP-P-3 | 2540 |
| Ballu BHP-P-5 | 3210 |
| Master B 22 EPB | 28700 |
Useful advice! When buying a heat gun, you should definitely pay attention to the type of plug to connect and take into account the power of the outlets.
Some models of heat guns may have a wall arrangement
Rating of electric heat guns for cottages
In most cases, alternative thermal equipment is used to heat residential premises in the country. Such buildings are located outside the city, so most of them lack a centralized heating system. On sale you can find dozens of optimal models of domestic and foreign production, which are perfect for this purpose.
The Interskol TPE-3 electric heat gun can be used as the main or additional heat source. The device has a lightweight design and small dimensions, which greatly simplifies the transportation of the device. The gun is equipped with a fan having a metal impeller. The heating element has a special configuration that provides increased heat output. The design is equipped with a two-stage power control system and overheating protection.
Advantages of the Interskol TPE-3 heat gun:
- high efficiency;
- reliability;
- long warranty period.
The Interskol TPE-3 heat gun can be used as the main or additional heat source
Among the disadvantages of this model, users noted a short cord, which somewhat limits the installation of the device.
Unlike the previous version, a ceramic heating element is installed in the Ballu BKX-5 thermal electric gun. The power of 3 kW is enough to heat a room of 35 m2 in size. The metal-ceramic heating element provides fast and safe air heating. The device is equipped with a three-level power control system.
Advantages of the Ballu BKX-5 heat gun:
- possibility of ventilation of air without heating;
- built-in thermostat;
- temperature adjustment function;
- economy;
- compact dimensions.
The model of the BKX-5 cannon from Ballu is equipped with a ceramic part of the heating element
The disadvantages include a short wire and a small noise level that occurs during operation.
Average prices for rating models:
| Brand and model of the device Place in the rating | Price, rub. |
| Interskol TPE-3 1 | 2270 |
| Timberk TIH R2 5K 2 | 4300 |
| FUBAG Bora Keramik 20M 3 | 2600 |
| Shivaki SHIF-EL60Y 4 | 4500 |
| Timberk TIH R5 3M ECO 5 | 2340 |
| Elitech TP 2EM 6 | 3050 |
| Timberk TIN Q2 2M 7 | 2000 |
| Ballu BKX-5 8 | 2000 |
| Resanta TEP-2000K 9 | 1850 |
| Interskol TPE-5 10 | 4000 |
How to choose a 220V electric heat gun according to technical parameters
The heat gun is installed on any horizontal surface. If necessary, the structure can be moved. The device works almost silently, which does not negatively affect the tenants of the apartment or the working environment in the office. Its performance depends on the technical characteristics of the gun. To decide which heat gun is better, you should study its parameters.
The heat gun for heating the room must be selected based on the performance parameters
Pay attention! When a new gun is turned on for the first time, a slight odor may appear. This is considered normal. In the course of further operation, it will disappear.
When choosing a heating device, you need to pay attention to the following characteristics:
- power level;
- the presence or absence of the ability to adjust the degrees of power;
- fan performance;
- the speed at which the heated airflow exits the structure;
- outlet air temperature;
- voltage in the electrical network;
- number of operating modes;
- fire safety level;
- dimensions of the device;
- degree of mobility;
- decorative qualities;
- noise exposure level;
- additional functionality.
The device of the heat gun is quite primitive, so you can assemble such an assembly even from improvised means, but only purchased models can provide the proper level of security
How to choose an electric heat gun: calculation of optimal power
To decide which heat gun to buy for a garage, you should find out what power indicator the design should have. This takes into account the size of the room. For example, if the dimensions of the garage are 4×6 m, by simple calculations you can find the desired indicator.
To begin with, the area of the room is calculated. In this case, it is equal to 24 m2. Experts recommend adding a small margin of 20% of this value to the required power indicator. The result is: 2,4×1,2 = 2.88 kW. So, for the specified room, the minimum power of the heat gun is 3 kW.
There is another technique. It allows you to get a more accurate result. It is desirable to use this option to calculate the power of a thermal electric gun for a house. In this case, the formula is based not on the area of the room, but on the degree of thermal conductivity of the walls and the volume of the room.
Most models of heat guns have power and temperature controls
First you need to get the indicators necessary for calculations:
Table of thermal conductivity of materials:
| Wall material | Coefficient of thermal conductivity |
| Surfaces with high-quality thermal insulation | 06,-1 |
| Brick double-row masonry or wall with an average level of thermal insulation | 1-2 |
| Surfaces with poor insulation | 2-3 |
| Walls made of boards or profiled sheet (hangars) | 3-4 |
To understand which heat gun to choose, it is enough to perform the necessary calculations, considering the same garage as an example. The volume of the room: 4x6x3 = 72 m3. If the temperature outside the building is -20 ° C, and inside it is 15 ° C, then the difference will be 35 °. Taking the insulation coefficient 1, we get: 35x72x1 = 2520 kcal / hour. 1 kW contains 860 kcal.
You can choose a suitable heat gun by using the formula to calculate the required minimum power of the device
The result should be divided by 860 kcal and the result is 2.93 kW. If we take into account that the power of the gun is taken with a margin, then a device with 3.5 kW will be required for such a room.
Useful advice! You should not buy a gun with a high power rating for your home. Such devices drive away a strong air flow, so they will create a lot of noise during operation.
How to choose a heat gun: voltage and duration of operation
The operating voltage is another characteristic that requires attention. There are units on the market whose power exceeds 20 kW. For the operation of such structures, a three-phase electrical network is required, where the voltage is 380V. If you are going to buy exactly such a heat gun for heating, you definitely need to take care of replacing the wiring with a more powerful option.
Some models of heat guns are equipped with moisture protection, which allows them to be used to dry the room
Structures whose power does not exceed 7 kW can be powered from a mains voltage of 220V, provided that the wire section is designed for such loads. Before connecting the heat gun, it is advisable to calculate the optimal cable cross-section taking into account power and current. Thanks to this, problems with wiring and short circuit can be avoided.
When choosing a heating device, it is also necessary to pay attention to the duration of uninterrupted operation. The device is not able to work for a long time without switching off, otherwise it will fail very quickly. For this reason, manufacturers of heat guns are marked “24/1” or “24/2” on the body. This means that the device is capable of working around the clock with a break of 1-2 hours, depending on the specified mark.
There are other technical characteristics that affect the operation. When choosing a device, it is necessary to pay attention to the level of noise exposure and the temperature range within which the gun is able to effectively carry out its work.
Pay attention! The minimum operating temperature range for a high-quality device is 5-40 ° C.
Professional heat guns for production can work around the clock, but with a short break (1-2 hours)
The best models of electric heat guns 2 kW
Electric guns are characterized by a high degree of safety, since their principle of operation does not provide for the presence of an open flame. One of these designs is the Ballu BHP-PE-2 heat gun, which has three operating modes. The device is suitable for both partial and full heating of the room. The device can be used as a fan, the operation of which is not accompanied by air heating.
Thanks to the vandal-proof coating, the service life is significantly increased. The thermostat reliably protects the structure from overheating, ensuring safe operation.
Owners of small premises will appreciate the compact size of the Ballu BKN-3 heat gun. The device is equipped with a robust housing that provides protection against corrosion and mechanical impact. As a material for the manufacture of the heating element, the manufacturer used ceramics.
The Ballu BKN-3 heat gun has a long service life due to the vandal-proof coating and the use of ceramics for the heating element
Advantages of the model:
- compact size and lightweight design;
- industrial type fan with protection from moisture and dust;
- a heat shield that lowers the temperature of the housing;
- the supports are protected by vandal-proof coating;
- handle for convenient transportation.
This model has Class A energy efficiency, so it can be used for rapid heating of the room, as well as drying of materials and treated surfaces.
The best models of electric heat guns 3 kw 220V
Devices with a power of 2 kW will not cope with heating rooms of 30-35 m2 in size. To do this, you can use the Ballu BHP-PE-3 heat gun and other similar models. In this case, the capacity of the unit is 300 m3/h, and the power level varies from 0 to 3 kW.
The BHP-PE-3 model heat gun from Ballu has an adjustable housing position that allows you to direct air flows
Advantages of the model:
- shockproof and heat resistant housing;
- stainless steel heating element;
- ventilation function without heating;
- adjustable position of the structure, allowing to direct air flows;
- reliable overheating protection in the form of a thermostat.
For heating garages and other non-residential premises, many consumers use the Resanta TEP-3000K electric heat gun. For convenient transportation, a special handle is provided in the design, which allows you to carry the device to any convenient place. The heating element has a rounded shape and provides rapid heating of the air in the room to the required temperature.
The gun operates in two modes:
Resanta TEP-3000K is used for heating garages and other non-residential premises
A metal grille is installed in the front of the case. It prevents debris and other particles from entering the device, ensuring fire safety and the safety of parts. The controls are made of heat-resistant plastic, which withstands the influence of high temperatures.
Useful advice! The Resanta TEP-3000K heat gun, like any other, will last much longer if it is cleaned and serviced in a timely manner.
Advantages of the model:
- step-by-step power adjustment system;
- a wide base that ensures the stability of the structure;
- effective overheating protection;
- low noise exposure;
- the case is not afraid of corrosion;
- safe operation system.
The TEP-3000K heat gun from Resanta has a step-by-step power adjustment system
Strengths and weaknesses of the Resanta TEP-3000K heat gun: consumer reviews
Many users have already experienced the capabilities of the TEP-3000K cannon in practice and shared their opinion:
“Great gun. Among the advantages I want to mention the low price. The device works almost silently and does not take up much space. For a small room, just right. I can’t say that a heat gun is a basic necessity, but such a thing will not be superfluous in the house. My husband periodically uses it in his garage, although we took it for a bath. When it’s freezing outside, you can’t do without pre-heating the premises. Without this gun, it took almost the whole day to kindle the bathhouse, a couple of hours is enough with the device.”
Elena Prodayvoda, Moscow
“Using a Resanta welding machine in my garage. It’s cold to work in winter, so I decided to buy myself a heat gun from the same company. A little disappointed. I have a good, high-quality welding machine. I didn’t think it would be any different with a gun. It is, of course, small and very quiet, but in fact the room heats poorly, eats a lot of electricity. I don’t know if the heat guns themselves are nothing, or if the model should have been taken more powerful. In general, I have it almost idle. I occasionally use it to start the car engine.”
Stanislav Sidorenko, Yekaterinburg
According to user reviews, the TEP-3000K heat gun works almost silently and is convenient to transport
The best models of electric heat guns 5 kW
The manufacturer of electric heat guns Ballu offers users heating devices of various capacities and purposes. On sale you can find devices designed for domestic and professional use, which are combined in a series.
For rooms larger than 35 m2, you can purchase the BKX 7 model. This gun has a metal-ceramic heating element and a power of 5 kW. Thanks to the steel walls, the housing of the device does not heat up during operation.
Advantages of the Ballu BKX 7 heat gun:
- heating element made of cermet of class A;
- the case with an increased margin of safety, made of steel;
- the ability to adjust temperatures;
- reliable and high-quality components;
- lightweight and compact design;
- effective heating;
Ballu BKX 7 is equipped with a metal-ceramic heating element and has a power of 5 kW
- the service life of the heating element is at least 10 years;
- three-level security system;
- protection against scrolling and pulling out of the cable is provided;
- the operating mode switch is protected from the negative effects of moisture and dust;
- due to the rubber coating on the legs, the level of noise and vibration effects is reduced when the gun is turned on.
Important! If there is a power failure, it is advisable to unplug the appliance from the outlet. The same applies to the time when the gun is not in use or it is being cleaned.
The Timberk TIH R2 5K cannon with the same power is designed for heating production and warehouse premises. The heating element has fins that increase the area through which heat is released.
The Timberk TIH R2 5K electric gun is used for heating industrial and warehouse premises
Advantages of the model:
- low noise level;
- high build quality;
- ergonomic design;
- efficient heating.
Users noticed only one drawback – a large consumption of electrical energy.
Features of semi-industrial ceramic heat guns
Especially popular on the market are models of electric heat guns with a heating element made of ceramics. Such devices belong to the category of semi-industrial or industrial heaters. Some modifications have a built-in cleaning system. It is a filter through which the heated air passes before entering the room.
Semi-industrial heat guns are often equipped with a ceramic heating element, which makes it possible to increase the duration of operation with a high level of use of the device
These devices can be both stationary and portable. The principle of operation of the ceramic gun is the same as that of conventional models, where there is a metal heating element. In some versions, adjustable blinds are installed. Due to this, the user has the opportunity to adjust the air supply according to their needs.
Overview of the thermal ceramic gun Equation 2000 W
This model is a compact heat gun designed for semi-professional and domestic use. Most parts and body construction are made of stainless steel. Thanks to the powder enamel coating, all metal elements are protected from damage that can be caused by corrosion. This layer also performs an electrical insulation function.
Advantages of Equation 2000W:
- economical consumption of electrical energy;
- compact dimensions;
- multiple operating modes;
- convenient operation and transportation system.
The gun has 1 protection class, which consists of a fuse and a mechanical thermostat. The device is designed for heating a room with an area of no more than 20 m2. There is no moisture protection, which is a disadvantage if the design is supposed to be used to dry the finishes on the walls or in a garage with a high degree of humidity. The heating element develops a power of 2 kW. The average price of the model is about 2000 rubles.
A feature of the Equation 2000W thermal ceramic gun is the economical consumption of electrical energy
Useful advice! Guns with composite and plastic casing are less safe and practical. It is advisable to give preference to metal models.
Overview of the thermal ceramic gun Equation 3000 W
Equation 3000W is a relatively inexpensive model of a heat gun. The power of the heating element made of ceramic is 3 kW. This is enough to heat a garage, office or living space, the size of which does not exceed 25 m2. The design has three operating modes that are switched mechanically.
The device is equipped with a sensor that automatically disconnects the device from the power supply, eliminating the possibility of overheating. The design also provides a fuse. This sensor is triggered if the device has turned over or fallen sideways. As a result, the supply of electricity to the heating element stops. Thanks to this, the operation of the heat gun becomes safe.
The cylindrical body of the device is made of metal. The manufacturer took care of safety by making the supply stable. The device has a light weight and small dimensions, so it is easy to move it from one place to another. The average cost is 2500 rubles.
Features of Industrial heat guns electric 380 Volts
Industrial guns in most cases are used to heat warehouses and production facilities, workshops, hangars, bases, pavilions, etc. Some models have high power, which reaches 30 kW. Such equipment is designed for heating large rooms.
Industrial electric heat guns are used for heating warehouse and industrial premises with a large area
Advantages of industrial models:
- environmental friendliness;
- no need to ventilate the room;
- safe operation system;
- high reliability.
Industrial units, as well as household ones, work exclusively at the expense of electric energy. They do not emit unpleasant odors and smoke, while oxygen is stored in the room. Despite the high power, these structures are completely safe, since they are designed for such loads. Industrial guns work almost flawlessly. The structures contain the simplest systems and nodal elements, so the probability of failure is minimal.
Review of the professional Ballu BHP-M-15 heat gun
The BHP-M-15 model belongs to the MASTER series of professional devices. The manufacturer has equipped the design with a capillary thermostat, which is highly accurate. This component allows you to maintain the air temperature in the room strictly within the specified limits.
The model of the Ballu BHP-M-15 cannon from the MASTER series of professional devices is equipped with a capillary thermostat, which allows you to keep the room temperature in the specified parameters
All guns in this series have vandal-proof and fire protection. The thermostat is equipped with a restart option, which can be done manually. This eliminates the possibility that the device will resume its operation after an emergency shutdown has occurred, but the cause of overheating has not been eliminated. The structure has a traditional rectangular shape. The average price of the 380V Ballu BHP-M-15 electric heat gun is 11,000 rubles.
Useful advice! Before you buy a gun, it is advisable to make sure that there is an official service center in the city. Otherwise, any repair in the future will cause a lot of difficulties and money costs. Forwarding the device to another city will significantly increase the time needed to fix the breakdown.
Advantages of the model:
- reliable stainless steel heating element;
- high-precision capillary type thermostat;
- industrial fan with protection from moisture and dust;
- manual restart option;
- metal housing with anti-corrosion protection.
Structural details of the Ballu BHP-M-15 heat gun model
The device can be easily moved to another place in one hand. There is a plug designed for three phases on the housing.
How to make an electric heat gun with your own hands
An electric device for heating the room can be made independently. The simplest design consists of a heating element, a fan and an electric motor. All this is hidden in a metal case. The most difficult stage is the development of an electrical circuit diagram. To avoid mistakes, you can use ready-made options that can be found on the Internet. Most often in the circuit, the thermostats and the toggle switch are connected in series. The circuit is closed on an electric motor and a heating element.
Assembly technology of a simple structure with a heating element
As a housing for a future gun, you can take a large-diameter pipe trim. Metal or asbestos-cement products are suitable for this. The size of the case should be selected taking into account the span of the fan blades, which should overlap one of the end sides of the device. Ready-made heating element can be purchased in the store or removed from an old boiler or stove. To work, you will need a circuit breaker, a cable with three cores, a safety automatic, bolts.
Useful advice! For the manufacture of the housing, you can also use improvised means, for example, a small metal tank, an old saucepan, a galvanized bucket. The main thing is that the structure has thick walls.
A heat gun for heating the room can be assembled with your own hands from improvised means
To begin with, the required power of the device is determined. To do this, you can use the formula that was considered earlier. After that, you need to check whether the wiring in the room will withstand such a load.
Next, the body part is manufactured. If there is no metal pipe at hand, you can take a steel sheet. It bends in the desired position and is fixed with rivets, hoops or by welding. If a bucket or pan is intended to be used, the bottom should be sawed off. The result should be a rectangular or cylindrical body.
Then the resistance of the heating element is compared with the calculated data. If necessary, 1-2 additional elements can be added to the circuit, which are connected in series. To increase the power, the TEN is shortened. An electric motor and a fan are fixed from one end. The blades should cover the lumen as much as possible, but nothing should interfere with rotational movements. The connection of the network wires is carried out through a fuse. A switch is also installed here.
Scheme of a heat gun with a temperature controller and a temperature limiter
The TENG should be fixed inside the case, preferably in the center. Plates made of refractory metals or rivets can be used as fasteners. The heating element must be located at a sufficient distance from the fan, otherwise the motor will be subjected to overheating. The wires should be brought out and connected to the mains through another fuse.
The design is completely ready. Before starting its operation, it is necessary to check the quality of insulation on all connections and perform a trial test. If the assembly is done correctly, a fan will start from one end, and heated air will come out from the second. Such a gun is very easy to manufacture and requires only time and minimal knowledge in electrics, although it will be much safer to purchase a ready-made device in a store.
